Art 37018

Adaptable to

carica batterie PULSE 50

carica batterie PULSE 50
Disponibile nelle categorie : BATTERY CHARGER AND STARTERS
carica batterie PULSE 50

Description

FEATURES:
6/12/24V electronic, automatic battery charger for WET,GEL, AGM, MF, SPIRAL, START-STOP batteries, for automatic charging/maintenance (PULSE TRONIC), for recovering sulphated or very low batteries and vehicles start aid. It is very easy to use, thanks to the automatic recognition of the type of battery, and the presence of a user-friendly keypad. 
The innovative Power Stream technology guarantees better performance, up to 50% more than traditional battery chargers thanks to more effective and complete control of the charging process, to notably faster charging times and maintenance of the optimal battery conditions, which guarantee a longer working life.
The Pulse Tronic technology guarantees optimal battery charging over 8 phases which test, monitor, increase and maintain the charge state.
- automatic charging/maintenance, BOOST quick charge and START aid
- SMPS (Switch Mode Power Supply) Technology
- Pulse Tronic charge with pulsed charge holding
- LED signalling of the charge state, end of charge and protection intervention
- sulphated battery recovery selection
- clamps not powered if disconnected from the battery - anti-spark device, protection against short-circuits, polarity reversal, overvoltage at input and faulty battery.
Fit with PFC device.

Caratteristiche Tecniche

WET Batteries: Lead-Antimony (PbSn) or Lead-Calcium (PbCa) or Lead Calcium-Silver (PbCaAg) batteries with liquid electrolyte.
GEL Batteries: Lead-Calcium batteries (PbCa) with solid gelatinous electrolyte. Given that these batteries are completely sealed. Maintenance free.
AGM Batteries: These are solid (starved) electrolyte lead-calcium (PbCa) batteries. They are completely sealed. Maintenance-free

Data

Voltage 230V 1ph
Frequency 50/60 Hz
Power absorbed in charge 600 W
Charging voltage 6/12/24 V
Effective charging current 45/45/23 A
Charging current EN60335-2-29 40/40/20 A
starting current 1v/c EN60335-2-29 40A (Boost) / 70A (Start)
Minimum reference nominal capacity 10 Ah
Maximum reference nominal capacity 600 Ah
Adjustment positions 1
Dimensions 330x100x160 mm
net weight 3.74 kg
Info cermag